Adhesives and Sealants
Liquid Colorants:
- ACOSIL® (For waterborne systems)
- ORGASIL® (For Solvent Based Systems)
- COLPUR, ISOPUR® and MOLTOPREN® (For 100% solids systems and Hot Melts)
-
Phenolic Resins:
- DUREZ® (Terpenophenolic resins for solvent-based latex cements).
Catalysts:
- ADDOCAT® (Amines catalysts and tin salts for polyurethane adhesives).
-
Anti-Hydrolysis Agents:
- STABAXOL® (Hydrolysis protection and anti-aging additives for polyester and EVA adhesives)
Dispersing agents:
- ADDOVATE® (ionic and non-ionic emulsifiers for water-based adhesives).
UV tracers:
- Fluorescent dyes and optical brighteners ACOSIL® and MOLTOPREN®.
Automobile Industry
Liquid Colorants:
- COLPUR, ISOPUR® and MOLTOPREN® pastes for polyether and polyester based polyurethanes.
- IMC lacquers (for interior coating of molds) ISOTHAN® for polyurethane technical parts.
-
Release agents:
- ACMOS® (Aqueous and solvent based silicone free dispersions)
- ACMOSIL® (Very versatile range of water-based and solvent-based release agents).
- Internal wax-based release agents.
-
Cleaners:
- ACMOSOL® (water-based and solvent-based solvents for cleaning and degreasing molds, plastic parts and tools).
- Low toxicity.
- Environmentally friendly.
-
-
Catalysts:
- ADDOCAT® (catalyst amines and tin salts for formulating polyurethane systems).
- ADDOLINK® (diols and crosslinking amines for polyurethane elastomers).
- Low VOC and volatile compound emissions.
Rubber products:
- DUREZ® phenolic resins
- ACMOS® release agents for rubber
Dispersants:
- ADDOVATE® (ionic and non-ionic emulsifiers and silicone based for formulating polyurethane systems).
Phenolic Resins:
- DUREZ® phenolic reinforcing and tacking resins for rubbers (tubes, profiles, tires, etc.).
-
-
- Low free phenol content.
- They allow to obtain rubbers with high hardness.
-
Silicone rubbers:
- Polycondensation rubbers vulcanizable at room temperature (RTV) for mold making and prototyping applications.
- Room temperature vulcanizable (RTV) polyaddition rubbers for mold making and prototyping applications. Excellent dimensional stability and high chemical and mechanical resistance.
- Available in a wide range of hardnesses.
-
Anti-Hydrolysis Agents:
- STABAXOL® (Hydrolysis protection and anti-aging additives for polyurethane foams, elastomers; Vulkollan®, and polyesters).
Rapid Prototyping Resins:
- Polyurethane resins for the manufacture of prototypes and limited series.
- They allow the manufacture of functional parts similar to those made with thermoplastics.
- They are used in vacuum casting machines and silicone molds.
- They do not contain mercury or halogens.
-
Equipment:
- Dosing units for the formulation of polyurethanes and polyureas.
- Compact and modular designs for polyesters and MDI (isocyanates) storage units.
- Equipment for the application of release agents (manual and automatic), pumps and boilers.
-
Construction Industry
Liquid Colorants:
- COLPUR, URESPRAY, ISOPUR® and MOLTOPREN® pastes for polyurethane applications.
- ACOSIL® pastes for aqueous dispersions and microcements.
- ORGASIL® pastes for solvent-based systems.
- ORGAPOX® pastes for epoxy resins.
Release agents:
- ACMOS® and ACMOSIL®: water or solvent based release agents, with or without silicone, for polyurethane applications.
Cleaners:
- ACMOSOL® (Water-based and solvent-based solvents for cleaning and degreasing molds, plastic parts and tools).
- Low toxicity.
- Environmentally friendly.
Catalysts:
- ADDOCAT® (catalyst amines and tin salts for formulating polyurethane systems).
- Low emissions of volatile compounds and VOC.
Anti-Hydrolysis Agents:
- STABAXOL® (Hydrolysis protection and anti-aging additives) for polyurethane foams and elastomers.
Dispersants:
- ADDOVATE® (ionic, non-ionic and silicone based emulsifiers for formulating polyurethane systems).
Silicone rubbers:
- Room temperature vulcanizable (RTV) polycondensation rubbers for mold making.
- Room temperature vulcanizable (RTV) polyaddition rubbers for mold making and prototyping applications. Excellent dimensional stability and high chemical and mechanical resistance.
- Available in a wide range of hardnesses.
Equipment:
- Dosing units for the formulation of polyurethanes and polyureas.
- Compact and modular designs for polyesters and MDI (isocyanates) storage units.
- Equipment for the application of release agents (manual and automatic), pumps and boilers.
-
Footwear Industry
Liquid Colorants:
- COLPUR, ISOPUR® and MOLTOPREN® pastes for polyurethane soles and insoles.
- COLPUR pastes for PVC and plastisol soles.
-
Release agents:
- ACMOS® (water-based and/or solvent-free release agents free of silicone oils).
- ACMOSIL® (Very versatile water-based and solvent-based release agents).
- Internal wax-based release agents.
-
Cleaners:
- ACMOSOL® (Water-based and solvent-based solvents for cleaning and degreasing molds, plastic parts and tools).
- Low toxicity.
- Environmentally friendly.
Catalysts:
- ADDOCAT® (catalyst amines and tin salts for formulating polyurethane systems).
Antihydrolysis agents:
- STABAXOL® (Hydrolysis protection and anti-aging additives) for polyurethane and EVA elastomers, soles and insoles.
Dispersants :
- ADDOVATE® (ionic, non-ionic and silicone based emulsifiers for formulating polyurethane systems).
Silicone Rubbers:
- Economical room temperature vulcanizable silicones for monocopy molds.
Equipment :
- Dosing units for the formulation of polyurethanes.
- Compact and modular designs for polyesters and MDI (isocyanates) storage units.
- Equipment for the application of release agents (manual and automatic), pumps and boilers.
-
Glass Industry
Lubricating and cooling oils for cutting blades:
- Water-soluble ACMOS® Drills for use in circuits with or without recirculation and water recovery.
- High resistance to microorganisms.
- Free of mineral oils and nitrites.
- Excellent lubricating and cooling properties.
- Very good corrosion protection.
- Economic use.
-
Mold release agents:
- ACMOS® greases for mouth molds, premolds and molds for glass bottle manufacturing and rotational blow molding technologies.
- They do not stain glass.
- Special ACMOS® lacquers and protective agents for molten glass distribution channels.
- Resistant to high temperatures.
-
Cleaners and corrosion protectors:
-
-
- ACMOSOL® cleaners for cleaning and degreasing molds.
- ACMOSIN® anti-corrosion protectors for molds, tempering furnaces, conveyor belts and furnace screens.
- Low toxicity.
- Environmentally friendly.
-
Defoamers:
- ACMOS® defoamers to prevent foaming of the water in the cooling circuits.
Paints, Varnishes and Inks
Liquid Colorants:
- ACOSIL® coloring pastes for water based paints and varnishes systems.
- ORGASIL® coloring pastes for solvent based paints and varnishes.
- ORGAPOX® coloring pastes for epoxy systems.
- COLPUR® pastes for plastisols and polyurethane systems.
- Colors according to RAL, NCS, Pantone charts on request.
-
Enamels:
- E. S/A Air-drying solvent based
- E. S/H Water and solvent based for oven drying.
-
Lacquers and Varnishes:
- Coatings and lacquers for screen and offset printing.
- UV curing varnishes.
-
Primers:
- Adhesion promoters. Primers.
- Surface treatments.
-
Diluents:
- Special thinners for NC and Epoxy.
Inks:
- Air drying solvent based
Catalysts:
- ADDOCAT® (Catalyst amines and tin salts for formulating polyurethane paints and lacquers.
- Low emissions of volatile VOC compounds.
Antihydrolysis agents:
- STABAXOL® (Hydrolysis protection and anti-aging additives for polyester systems.
Dispersants:
- ADDOVATE® (ionic and non-ionic emulsifiers for water based systems)
Equipment:
- Dosing units for the formulation of polyurethanes.
- Compact and modular designs for polyol and isocyanate storage units.
Manufacturing Services:
- Intermediates, lacquers, paints, enamels and other products.
Plastics Recycling
Reactors to recover and synthesize polyols from PU waste:
- New technology for obtaining polyols based on a new method of waste acidolysis.
- PU waste is dissolved in a special mixture of glycols and catalysts.
- The raw materials are discards and milled remains of polyurethane foams.
- The end products are recovered polyols that can be blended with conventional polyols in the production of foams without loss of quality.
- Complete range of reactors to meet customer demands.
-
Reactors to recover and synthesize polyols from PET waste:
- New process developed and optimized by H&S Anlagentechnik GmbH.
- Based on the trans-esterification of polyethylene terephthalate with glycols and adipic acid.
- The end products are high quality aromatic polyesters, excellent for the production of polyurethane foams.
- Complete range of reactors to meet customer demands.
-
Wood and Furniture
Liquid Colorants:
- COLPUR, ISOPUR® and MOLTOPREN® pastes for rigid, flexible and molded polyether and polyester based polyurethane foams.
- ACOSIL® water-based pastes for plywood, melamine and wood fiber panels and boards.
Release Agents:
- ACMOS® release agents for urea veneer, melamine and white glues.
- ACMOS® water-based release agents for plywood and wood fiberboard pressing.
- Release agents for hot-melt and phenolic adhesives.
- ACMOS® and ACMOSIL® release agents for integral and molded foams.
- Low toxicity. Environmentally friendly.
- Can be applied by spray, roller or brush.
-
Lubricants:
- WAXILIT® (Lubricants for joinery machinery, carpentry, slides, drawers and metal joints.
- They can be applied with automatic dispensers or with a cloth and brush.
Cleaners:
- ACMOSOL® (For cleaning plastic surfaces and glue residues).
- ACMOSITAL® (Resin solvents for cleaning woodworking tools).
- Low toxicity.
- Environmentally friendly.
-
Other industries
Fertilizers:
- FERTINYL® coloring pastes are dispersions developed for use in fertilizers and agriculture.
- WITHOUT solvents or toxic products in their composition.
- Environmentally friendly.
- Available in a wide range of colors.
-
Filaments, Synthetic Fibers and Cables:
- STABAXOL® protective additives against hydrolysis for polyester polymers (PET, PBT, TPE, EVA) and polyamides.
- STABAXOL® extends the service life of filaments and cable encapsulates.
- STABAXOL® is also a crosslinker and chain extender increasing the viscosity of PET, PBT and PA melts in extrusion and rotational molding.
-
Tanning agents:
- STABAXOL® are stabilizers for synthetic leather applications and aqueous PU dispersions.
- STABAXOL® are crosslinking agents for aqueous polyurethane dispersions and high quality leather finishes.
-
Composite Plastics:
- ACMOSAN® and ACMOSCOAT® (solvent and water based primers and release agents for UP and Epoxy resin parts).
- ACMOSAL® internal release agents for UP, Phenolic and Epoxy resins (for pultrusion processes).
- ACMOSOL® (Solvent and water based products for cleaning molds, plastic parts and tools).
- COLPUR, ORGAPOL® and ORGAPOX® coloring pastes for UP and Epoxy resins.
Thermoplastic Polyurethane (TPU) :
- STABAXOL® Hydrolysis protection and anti-aging additives for TPU.
Our priority, customer satisfaction
If you have any questions or queries, please contact us:
